Stabilised Chlorine Granules used for daily sanitising pools and spas having a minimal effect on pH.. Does not contain calcium.

Ideal free chlorine range: 1 - 3mg/l (ppm)

Application Instructions

1. Maintain pH level within the ideal range of 7.2 – 7.6. If the not in this range, adjust.
2. This product may be applied directly to pools where temperatures exceed 20o C. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lt) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned ‘on’ preferably near the water inlets to aid distribution.
3. Repeat dose application if necessary to achieve ideal chlorine levels.
4. It is recommended that you periodically (e.g. weekly/fortnightly) shock or oxidise your water, using hth Shock Granules or Purisan Calcium Hypochlorite Granules.

Dosing:

Litres               Gallons              To Increase Chlorine By 1mg/l          To Increase Chlorine 3mg/l 

1,000                   220                          2g                                                             6g

4,545                 1,000                         9g                                                            27g

22,700               5,000                        45g                                                           135g

45,450              10,000                       90g                                                           270g

68,175               15,000                     135g                                                          405g

NOTE: Hot weather, high pool use or heavy rain may require a higher daily dose rate.

   SEE OUR ABOVE GROUND POOL GUIDE HERE