Stabilised Spa Chlorine Granules - Used for daily sanitising spa water, having a minimal effect on pH. Does not contain calcium.

Ideal Free Chlorine Range: 3 – 5mg/l

Application Instructions

1. Maintain pH level within the ideal range of 7.2 – 7.6. If the not in this range, adjust.
2. Maintain free chlorine residuals for spas within the range 3 – 5mg/l (ppm).*Freshly filled spas require initial shock or start up dose of chlorine: 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
3. This product may be applied directly to spas where temperatures exceed 20o C. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned ‘on’.
4. Repeat dose application if necessary to achieve levels in point 2 above. 5. It is recommended that you periodically (e.g. weekly or after heavy spa use) shock dose your spa with AquaSPArkle Spa Fusion to eliminate any excess contamination.

Dosing:

Litres               Gallons              To Increase Chlorine By 1mg/l          To Increase Chlorine 3mg/l 

1,000                   220                          2g                                                             6g

1,500                   330                          3g                                                             9g