- Description
-
Details
Purisan 1kg Spa Infused Bromine Granules. These bromine granules are ideal for daily dosing of your spa, to produce active bromine which kills bacteria and other potentially harmful organisms. They are rapid dissolving and have minimal impact on pH.
APPLICATION INSTRUCTIONS
- Maintain pH level within the ideal range of 7.2 – 7.6. If the not in this range, adjust.
- Maintain free chlorine residuals for spas within the range 3 – 5mg/l (ppm). *Freshly filled new spas or spas left drained for a period of time require an initial start up dose of 20mg/l (ppm) of free chlorine circulated for a minimum of 2½ hours. This product may be applied directly to spas where temperatures exceed 20o C. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned ‘on’.
- Repeat dose application if necessary to achieve levels in point 2 above.
- It is recommended that you periodically (e.g. weekly or after heavy spa use) shock dose your spa with AquaSPArkle Spa Fusion to eliminate any excess contamination.
Dosing:
Litres Gallons To Increase Bromine By 1mg/l To Increase Bromine 3mg/l
1,000 220 2g 6g
1,500 330 3g 9g
- Additional Information
-
Additional Information
Corrosive Substance No - Reviews
-