- Description
-
Details
Purisan Shock Chlorine Granules (Calcium Hypochlorite), Quick dissolving stabiliser free chlorine granules suitable for shocking and disinfection of swimming pool water. 65% Av. Chlorine. (Please note do not mix with organic chlorine (Trichlor or Diclor) in the same container).
CAN BE USED AS AN ALTERNATIVE TO SODIUM HYPOCHLORITE (LIQUID CHLORINE)
Application Instructions
- Maintain pH levels within the ideal range 7.2 – 7.6. If the level is not in this range, adjust.
- Maintain free chlorine residuals routinely in the 1 – 3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment.
- Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product of 2.2 gallon (10 litres) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump (s) are turned ‘on' preferably near the water inlets to aid distribution.
- Repeat dose/application if necessary to achieve the desired level.
- After using this product pool water may become temporarily cloudy, so keep the filtration pump running until it clears
- After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.
Dosing :
Litres Gallons To Raise Chlorine By 1mg/l To Raise Chlorine By 5mg/l To Raise Chlorine By 10mg/l
4,545 1,000 7g 35g 70g
11,360 2,500 17g 88g 175g
22,725 5,000 35g 175g 350g
68,175 15,000 105g 525g 1.05kg
- Additional Information
-
Additional Information
Corrosive Substance No - Reviews
-