- Description
-
Details
Purisan Spa Hardness Increaser - 1kg. When the calcium hardness level is below 100mg/l water can become corrosive leading to damage to spa finish and spa plant equipment. Spa Hardness plus is used to increase calcium hardness.
Ideal Calcium Hardness Range: 100 – 200mg/l
Application Instructions
- Before applying this product it should be pre-dissolved in a clean plastic container at a maximum rate of 10g per 0.2 gallons (1ltr) of clean cold water. Stir well to ensure the product is fully dissolved. Repeat application to achieve the total dose required – see table below for dose rates. It is recommended that the total treatment is split into three equal applications with a minimum of 1 hour between each.
- After pre-dissolving add the resulting solution to the spa with the filtration system in operation.
- Following the application the spa water may become cloudy so keep the filtration pump running continuously until it clears.
- After treatment check the pH level and if necessary adjust to ideal range of 7.2 – 7.6.
Dose rates
Litres Gallons To increase calcium hardness by 10mg/l To increase calcium hardness by 25mg/l
1,000 220 15g 38g
1,500 330 23g 56g
- Additional Information
-
Additional Information
Corrosive Substance No - Reviews
-